| |
|
| |
| |
| |
Welcome to Charisma Careers Pvt. Ltd. >> Hot News |
|
| |
|
| |
|
Hot News
| CCPL CNT Divn Ahmedabad |
Training Program on
Pressure Vessel Design, Construction & Inspection: ASME Sec VIII Div 1 & 2
Ahmedabad, Gujarat, India, August 30-Sept1, 2010
Training program on Pressure Vessel Technology, Design, Construction & Inspection is being held in Ahmedabad organized by Charisma Careers Pvt. Ltd (CCPL).
COURSE OBJECTIVE
This training course is designed to train individuals who are interested in proper application of the pressure vessel design, construction and inspection codes, as well as those who are seeking better understanding of repair, inspection, alteration and maintenance of pressure vessels. The program will provide in depth knowledge of ASME PV Codes, Sec VIII Div 1 and Div 2.
COURSE OUTLINES
Day 1:
ASME Sec VIII Div 1 and Div 2 PV Design and Construction Code
Introduction to ASME Code Scope, Design Concepts
Allowable Stresses, Joint Efficiency Factors
Design of Cylindrical Shell under Internal Pressure
Design of Spherical Shell, Hemispherical Heads, Ellipsoidal Heads, Torispherical Heads
External Pressure Design for Cylinders, Heads, Stiffening Rings
Integral Flat Plates and Covers,
Bolted Flanges, Gasket Requirements, Bolt Sizing, and Bolt Loadings
Design of Openings in pressure vessels, Reinforced Opening, Large opening design
Day 2:
Design of Supports
Design guidelines of tall vertical vessels
Wind Load Seismic Load considerations
Fatigue Analysis Requirements
Pressure Testing of Vessels and Components,
Welding, Fabrication, Inspection and Testing guidelines
Day 3:
Scope, Guidelines for Use of NDT
Welding Procedure Specification (WPS), Procedure Qualification Record (PQR), Welder Performance Qualification (WPQ),
Testing and Examination Requirements
Flaws and Defects in the Weld Zone
This program would prove useful for
1. Experienced Professionals who wish to brush up their knowledge and stay abreast with the latest in the industry. This would provide you an edge amongst all.
2. Engineers and Technologists and fresher from varied technical background interested in learning more about Pressure Vessel technological disciplines.
The training program package includes
1. Comprehensive course material of 100+ pgs for each of the seminar to each participant & exposure to Pressure Vessel Code Design Software like COMPRESS, ASME Exchanger
2. Lectures by renowned experts of 30+ years experience in the Industry
Our clientele include Oman Refinery , Qatar Petroleum, Oman Gas, PDO, L&T, ABB, TCE, EIL, GAIL, IFFCO, GSFC, IOC, RELIANCE, ALSTOM-POWER, LINDE, REAL, BHEL, BS & B, TRANSPEK, ONGC, PRAJ, Tecnimont ICB, MECON, SAIPEM, Chennai Petroleum, Aker Kvaerner Powergas, South Pacific Viscose Indonesia & many others who have benefited from program conducted regularly by us.
METHODOLOGY
1.Technical Sessions
2.Problem Solving Sessions
3.Case Studies
DATE & TIME
Place- Ahmedabad
Date- August 30- Sept 1, 2010
Time: 9.30 AM- 5 PM
VENUE
CEPL Design Center,
204, Sumel II
S.G. Highway, Adjascent to Gurudwara, Bodakdeo,
Ahmedabad 380079
Gujarat, India
Ph: +91-79-26859460-61, 9898084305
E-mail: cepl11@vsnl.net
REGISTRATION
Indian Participants:
The Registration fees: Rs. 15000 + Service Tax @10.3% = Rs 16545 per delegate.
The fee may be sent to us in the form of a Demand Draft or Cheque drawn in favour of Charisma Careers Pvt. Ltd., payable at Vadodara.
Foreign Participants:
The Registration fees shall be US $ 700 (includes Service Tax @ 10.3 % of the principal fee amount, (Principal Fee: US $ 634, ST: US $66) per delegate. Fees may be sent to us in the form of a Wire Transfer/ Demand Draft / Cheque drawn in favor of Charisma Careers Pvt. Ltd. on any bank in Vadodara, India.
You may pay the fee through wire transfer, the detail of which will be made available after the formal registration of the candidate.
Request for nominations can be sent before August 24, 2010 on the organization letter-head along with the demand draft.
Special Discount of 10% on the fee shall be allowed for more than 3 nominations by an organization.
CONTACT
Charisma Careers Pvt. Ltd.
302 Sunsilver Apartments, Nr. Akota Garden, Productivity Road, Vadodara 390020, Gujarat, India.
Phone: (0265)6616173 Fax: (0265)6616172
Mobile: (0)9974094156
Email: nkroy@charismacareer.com , ccplnkr@yahoo.co.in ; roy.narendra@gmail.com
Website: www.charismacareer.com
|
| 7/9/2010 10:11:11 PM |
Hot News
| CCPL CNT Ahmedabad |
Training Program on
Heat Exchanger Selection, Design and Application of Engineering Software
Ahmedabad, India, August 26-28, 2010
The technical program on Heat Exchanger Selection, Design and Application and relevant software application will be held in Ahmedabad, India by Charisma Careers Pvt. Ltd (CCPL).
COURSE OBJECTIVE
The program shall be useful to engineers and managers involved in selection, design, operation and maintenance of Heat Exchanger. Heat Exchanger is an integral part of a chemical process industry. The knowledge of design of heat exchanger is gaining importance as it provides solution to many plant problems. The course will lead to overall better understanding for heat exchanger as a whole.
COURSE OUTLINES
Applications of Heat Exchanger in process industry
Selection of Heat Exchangers
Heat Exchanger Geometry
Basics of Thermal Design of Exchanger
Vibration analysis of heat exchanger tube bundles
Heat Exchanger Fouling
Optimization and Design case Study
Material of Construction for Heat Exchanger components
Mechanical Design of Heat Exchanger (ASME & TEMA)
Orientation to mechanical design software application
Failure and Performance Case Histories
This technical program shall be useful to
1. Experienced Professionals who wish to brush up their knowledge and stay abreast with the latest in the oil, gas and processing industry. This would provide you an edge amongst all.
2. Engineers and Technologists and fresher from varied technical background interested in learning more about Heat Exchanger technological disciplines relevant to petrochemical, chemical and oil & gas, refineries and the downstream processing area.
The training program package includes
1. Comprehensive course material of 100+ pages relevant to the training program to each participant & exposure to Heat Exchanger Mechanical Design Software
2. Lectures by renowned experts of 30+ years experience in the Industry
Our clientele include Oman Refinery, Qatar Petroleum, Oman Gas, PDO, L&T, ABB, TCE, EIL, GAIL, IFFCO, GSFC, IOC, RELIANCE, ALSTOM-POWER, LINDE, REAL, BHEL, BS & B, TRANSPEK, ONGC, PRAJ, Tecnimont ICB, MECON, SAIPEM, Chennai Petroleum, Aker Kvaerner Powergas, South Pacific Viscose Indonesia & many others who have benefited from program conducted regularly by us.
METHODOLOGY
1.Technical Sessions
2.Problem Solving Sessions
3.Case Studies
DATE & TIME
Place- Ahmedabad, Gujarat, India
Date- 26- 28 August 2009
Time: 9.30 AM- 5 PM
VENUE
CEPL Design Center,
204, Sumel II
S.G. Highway, Bodakdev, Adjacent to Gurudwara,
Ahmedabad,
Gujarat, India.
Contact Phone: +91-79-26859460, 26859461; +91-9898084305
E-mail: cepl11@vsnl.net
REGISTRATION
Indian Participants:
The Registration fees shall be Rs 15000 plus service tax (10.3%) of Rs 1545 per delegate. Total Fee: Rs 16545
Foreign Participants:
The Registration fees shall be US $ 700 (includes Service Tax @ 10.3 % of the principal fee amount, (Principal Fee: US $ 634, ST: US $66) per delegate. Fees may be sent to us in the form of a Wire Transfer/ Demand Draft / Cheque drawn in favour of Charisma Careers Pvt. Ltd. on any bank in Vadodara, Gujarat, India.
You may pay the fee through wire transfer, the detail of which will be made available after the registration of the candidate.
Request for registration can be sent before August 20, 2010 on the organization letter-head along with the demand draft or cheque on Vadodara Bank or wire transfer.
Special Discount of 10% on the fee shall be allowed for more than 3 nominations by an organization.
CONTACT
Charisma Careers Pvt. Ltd.
302 Sunsilver Apartments, Near Akota Garden,
Productivity Road, Vadodara-390020, Gujarat, India
Phone: +91-265-6616173 Fax: +91-265-6616172
Mobile: +91-9974094156
Email: nkroy@charismacareer.com , ccplnkr@yahoo.co.in ; info@charismacareer.com
Website: www.charismacareer.com
|
| 7/9/2010 10:09:44 PM |
Hot News
| CCPL CNT Divn Vadodara |
Training Program on
Pressure Vessel Design as per Codes and use of Software
Vadodara, Gujarat, India , August 19- 21, 2010
Training program on Pressure Vessel Design and related orientation to popular software is being held in Vadodara organized by Charisma Careers Pvt. Ltd (CCPL).
COURSE OBJECTIVE
This training course is designed to train individuals who are interested in proper orientation to the pressure vessel design, related codes, as well as those who are seeking better understanding of the software applications like PVElite.
COURSE OUTLINES
Design of Cylindrical Shell under Internal Pressure
Design of Spherical Shell, Hemispherical Heads, Ellipsoidal Heads, Tori-spherical Heads
External Pressure Design for Cylinders, Heads, Stiffening Rings
Bolted Flanges, Bolt Sizing, and Bolt Loadings
Design of Openings in pressure vessels, Reinforced Opening, Large opening design
Orientation to software (PVElite) design applications
Design of Openings (Nozzles) in pressure vessels, Reinforced Opening, Large opening design
Local Load Stress Analysis (WRC107)
Design of Supports (Skirts, Saddles, Leg, Brackets)
Wind Load and Seismic Load considerations (as per IS standards)
Fatigue Analysis Requirements
Orientation to software (PVElite) design applications
This program would prove useful to
1. Experienced Professionals who wish to brush up their knowledge and stay abreast with the latest in the industry. This would provide you an edge amongst all.
2. Engineers and Technologists and fresher from varied technical background interested in learning more about Pressure Vessel design and analysis disciplines.
The training program package includes
1. Comprehensive course material of 100+ pgs for each of the seminar to each participant & exposure to Pressure Vessel Code Design Software like PVElite
2. Functional Demo CD of PVElite for your practice on return to work place
3. Lectures by renowned experts of 30+ years experience in the Industry
Our clientele include Oman Refinery , Qatar Petroleum, Oman Gas, PDO, L&T, ISGEC, ABB, TCE, EIL, GAIL, IFFCO, GSFC, IOC, RELIANCE, ALSTOM-POWER, LINDE, REAL, BHEL, BS & B, TRANSPEK, ONGC , PRAJ, Tecnimont ICB, MECON, SAIPEM, Chennai Petroleum, AkerKvaerner Powergas, South Pacific Viscose Indonesia, Petronas & many others who have benefited from program conducted regularly by us.
METHODOLOGY
1.Technical Sessions
2.Problem Solving Sessions
3.Case Studies
DATE & TIME
Place- Vadodara
Date- August 19- 21, 2010
Time: 10 AM- 5 PM
VENUE
CCPL Conference Hall, Vadodara, Gujarat, India
REGISTRATION
Indian Participants:
The Registration fees: Rs. 15000 + Service Tax @10.3% = Rs 16545 per delegate.
The fee may be sent to us in the form of a Demand Draft or Cheque drawn in favor of Charisma Careers Pvt. Ltd., payable at Vadodara.
Foreign Participants:
The Registration fees shall be US $ 700 (includes Service Tax @ 10.3 % of the principal fee amount) per delegate. Fees may be sent to us in the form of a Wire Transfer/ Demand Draft / Cheque drawn in favour of Charisma Careers Pvt. Ltd. on any bank in Vadodara, India.
You may pay the fee through wire transfer, the detail of which will be made available after the formal registration of the candidate.
Request for nominations can be sent before August 13, 2010 on the organization letter-head along with the demand draft.
Special Discount of 10% on the fee shall be allowed for more than 3 nominations by an organization.
CONTACT
Charisma Careers Pvt. Ltd.
302 Sunsilver Apartments, Nr. Akota Garden ,
Productivity Road , Vadodara 390020, Gujarat , India .
Phone: (0265)6616173 Fax: (0265)6616172
Mobile : (0)9974094156
Email: nkroy@charismacareer.com , ccplnkr@yahoo.co.in , roy.narendra@gmail.com
Website: www.charismacareer.com
|
| 7/9/2010 10:08:45 PM |
Hot News
| CCPL CNT Divn Vadodara Ahmedabad |
|
Ref: CCPL/ 007/ 2010 (July8)
Calendar of Technical Training Program for Year 2010, Planned by CCPL Vadodara
We are one of the leading training centres for Process & Engineering industry. We had conducted the following seminars and technical training & refresher programs for various organizations for the benefit of their engineers and managers;
* Failure Analysis for safety and reliability
* Pressure Vessel Technology: Design, Fabrication & Inspection Guidelines
* Inspection and Quality Control in Fabrication of Process Equipments
* Piping Technology: Design, Stress Analysis, Erection and Inspections
* Pumps, Compressors, Turbines and Agitators Selection, maintenance and troubleshooting
* Instrumentation and Control Technology
* Non-destructive Testing for Reliability
* Material Handling Systems for Bulk Solids: Selection, Design and Operations
* Project Management: Feasibility, Process Selection, Project Implementation
* Plant Engineering & Audits: De-bottle-necking, Production Improvements
* Hazards and Safety Management, Audits
* Energy Conservation & Audits
We organize seminars, conferences and training courses including In-house Training programs on regular basis for the benefit of engineers & managers.
Technical Training Program Calendar for Year 2010
Certificate Course on Piping Engineering, Vadodara, July 12- 22, 2010, Fees: Rs 30000 per Indian delegate (Foreign Delegate: US $ 1000)
Pressure Vessel Design as per Code and use of Software, Vadodara, August 19- 21, 2010, Fee: Rs 15000 per Indian delegate (Foreign Delegate: US $ 700)
Heat Exchanger Selection and Design and use of Software, Ahmedabad, August 26-28, 2010, Fee: Rs 15000 per Indian delegate (Foreign Delegate: US $ 700)
Pressure Vessel Design and Construction as per ASME PV Code Sec VIII Div 1 and 2, Ahmedabad, August 30- Sept 1, 2010, Fee: Rs 15000 per Indian delegate (Foreign Delegate: US $ 700)
Air Compressors Selection, Maintenance and Operations, Ahmedabad, Sept 3- 4, 2010, Fees: Rs 10000 per Indian delegate (Foreign Delegate: US $ 700)
Pump Maintenance and Failure Analysis, Ahmedabad, Sep 6- 8, 2010, Fees: Rs 12000 per Indian delegate (Foreign Delegate: US $ 700)
Storage Tank Design and Inspection (API 650/ API 653), Ahmedabad, September 9-11, 2010, Fees: Rs 15000 per Indian delegate (Foreign Delegate: US $ 700)
Advanced Process Controls and Instrumentation Technology, Organized by COMFORI, Kuala Lumpur, Malaysia, Sept 27- 28, 2010
Piping Design and Stress Analysis Using Software, Ahmedabad, Sep 28- 30, 2010, Fees: Rs 15000 per Indian delegate (Foreign Delegate: US $ 700)
Pressure Vessel Design as per Code and use of Software, Organized bt CGNL Auckland NZ, October 12- 14, 2010, Fee: Rs 15000 per Indian delegate (Foreign Delegate: US $ 700)
Effective Project Management and Control, organized by CGNL NZ; Auckland, New Zealand, October 18-20, 2010, Fee: US $ 900 (NZ $ 1350) per delegate
Piping Systems and Pipeline Integrity Management, by QTPC Doha, Qatar, November 7- 9, 2010
Piping Design and Stress Analysis Using Software, Ahmedabad, Nov 18- 20, 2010, Fees: Rs 15000 per Indian delegate (Foreign Delegate: US $ 700)
Piping Systems and Pipeline Integrity (ASME B31 codes and API 579), Ahmedabad, Nov 22- 24, 2010, Fees: Rs 15000 per Indian delegate (Foreign Delegate: US $ 700)
Pump Maintenance and Failure Analysis, Organized by COMFORI, Kuala Lumpur, Malaysia, November 23- 24, 2010
Piping Systems and Pipeline Integrity (ASME B31 codes and API 579), Organized by COMFORI, Kuala Lumpur, Malaysia, November 29- 30, 2010
Effective Project Management and Control, Vadodara, December 2-4, 2010, Fee: Rs 15000 per Indian delegate (Foreign Delegate: US $ 700)
Safety Relief Valve Inspection, Repairs, Operation and Maintenance, Vadodara, Dec 9-11, 2010, Fees Rs 15000 per Indian delegate (Foreign Delegate: US $ 700)
Risk Based Inspection in Refineries, Petrochemical and Chemical Plants, Vadodara, February 15-17, 2011, Fees Rs 15000 per Indian delegate (Foreign Delegate: US $ 700)
Pump Maintenance and Failure Analysis, Ahmedabad, Feb 24- 26, 2011, Fees: Rs 12000 per Indian delegate (Foreign Delegate: US $ 700)
Effective Project Management and Control, Ahmedabad, April 11-13, 2011, Fee: Rs 15000 per Indian delegate (Foreign Delegate: US $ 700)
Effective Inventory Planning and Stock Control, Ahmedabad, April 14-16, 2011, Fee: Rs 15000 per Indian delegate (Foreign Delegate: US $ 700)
Turbine Design and Performance Evaluation, Vadodara, April 21- 23, 2011, Fees: Rs 15000 per Indian delegate (Foreign Delegate: US $ 700)
Understanding ASME Pressure Vessel Codes, Ahmedabad, June 2-4, 2011, Fee: Rs 15000 per Indian delegate (Foreign Delegate: US $ 700)
Process Equipment Design, Maintenance & Inspection for Oil & Gas Field Application, Vadodara, June 9-11, 2011, Rs 15000 per Indian delegate (Foreign Delegate: US $ 700)
Pressure Vessel Inspection, Repair, Alteration, and Reconstruction as per API Standard 510, Vadodara, June 14-16, 2011, Fees Rs 15000 per Indian delegate (Foreign Delegate: US $ 700)
ASME B31.3 Process Piping Code: Design Requirements, Ahmedabad, June 20-22, 2011, Fee: Rs 15000 per Indian delegate (Foreign Delegate: US $ 700)
Piping Inspection, Repair, Alteration, and Reconstruction as per API Standard 570, Vadodara, June 23-25, 2011, Fees: Rs 15000 per Indian delegate (Foreign Delegate: US $ 700)
Process Controls and Instrumentation Technology, Ahmedabad, July 4-6, 2011, Fee: Rs 15000 per Indian delegate (Foreign Delegate: US $ 700)
Material Handling Systems for Bulk Solids - Selections, Designs and Operations, Ahmedabad, July 7-9, 2011, Fee: Rs 15000 per Indian delegate (Foreign Delegate: US $ 700)
Piping Systems and Pipeline Integrity (ASME B31 codes and API 579), Ahmedabad, July 21-23, 2011, Fees: Rs 15000 per Indian delegate (Foreign Delegate: US $ 700)
Service Tax @ 10.3% on the fees shall be charged as extra.
Few other programs are being planned in Oman, Qatar, Yemen, Sharjah, Dubai, Saudi Arabia, Malaysia, New Zealand, Australia, Indonesia and India (Mumbai, Bangalore, Chennai, Pune, NOIDA/ Delhi, Goa & Ernakulum) and will be notified well in advance.
Contact: Charisma Careers Pvt. Ltd., 302 Sunsilver Aptt., Near Akota Garden, Productivity Road, Vadodara 390020, Gujarat, India;
Ph. +91-265-6616173, +91-265-2370858; Mobile: +91-9974094156; Fax: +91-265-6616172;
Email: nkroy@charismacareer.com ; info@charismacareer.com ; ccplnkr@yahoo.co.in
Website: http://www.charismacareer.com
|
| 2/15/2010 9:43:40 PM |
Hot News
| CCPL CNT Divn Ahmedabad |
Training Program on
Air Compressors- Selection, Maintenance and Operations
Ahmedabad, Gujarat, India, Sept 3- 4, 2010
Training Program on Air Compressor Selection, Maintenance and Operation is being held in Ahmedabad, by Charisma Careers Pvt. Ltd (CCPL).
Objective:
Machines and Equipment efficiency and reliability depend on proper maintenance practices and there is a clear relationship between maintenance practices, equipment productivity and the bottom-line profit. Determining the true cause of air compressor performance problems, correcting these problem and then adopting the correct installation and operating procedures can dramatically increase compressor life which results in increase in system reliability and reduction in unplanned downtime.
Who should attend?
This course is primarily designed for maintenance staff and engineers responsible for the day to day operations and maintenance of rotating machines like air compressors.
Course Outline:
Day 1:
Selection and Application of Air Compressors
Reciprocating Air Compressor
Screw Compressors
Centrifugal Air Compressor
Air Dryers
Compressed Air System and Compressor Efficiency
Day 2:
Maintenance of Air Compressors
Daily Compressor system observation
Semi-annual and Annual Inspections
Maintenance Planning and Scheduling
Energy Conservation and How to save energy
Discussions on Plant Case Histories
The training program package includes
1. Comprehensive course material of 200+ pages of the seminar to each participant & exposure to storage tank design, construction and inspection Codes.
2. Lectures by renowned experts of 30+ years experience in the Industry
Our clientele include Oman Refinery , Qatar Petroleum, Oman Gas, PDO, L&T, ABB, TCE, EIL, GAIL, IFFCO, GSFC, IOC, RELIANCE, ALSTOM-POWER, LINDE, REAL, BHEL, BS & B, TRANSPEK, ONGC, PRAJ, Tecnimont ICB, MECON, SAIPEM, Chennai Petroleum, Aker Kvaerner Powergas, South Pacific Viscose Indonesia & many others who have benefited from program conducted regularly by us.
METHODOLOGY
1. Technical Sessions
2. Problem Solving Sessions
3. Case Studies
DATE & TIME
Place- Ahmedabad
Date- September 3-4, 2010
Time: 10 AM- 5 PM
VENUE
Charisma Group/ CADD Center,
204, Sumel II, Sarkhej Gandhinagar (SG) Highway, Adjascent to Gurudwara,
Ahmedabad 380079, Gujarat, India
Contact Phone: 09898084305
REGISTRATION
Indian Participants:
The Registration fees: Rs. 10000 + Service Tax @10.3% = Rs 11030 per delegate.
The fee may be sent to us in the form of a Demand Draft or Cheque drawn in favor of Charisma Careers Pvt. Ltd., payable at Vadodara.
Foreign Participants:
The Registration fees shall be US $ 700 (includes Service Tax @ 10.3 % of the principal fee amount, (Principal Fee: US $ 634, ST: US $66) per delegate. Fees may be sent to us in the form of a Wire Transfer/ Demand Draft / Cheque drawn in favor of Charisma Careers Pvt. Ltd. on any bank in Vadodara, India.
You may pay the fee through wire transfer, the detail of which will be made available after the formal registration of the candidate.
Request for nominations can be sent before Aug 24, 2010 on the letter-head along with the demand draft of the fee.
Special Discount of 10% on the fee shall be allowed for more than 3 nominations by an organization.
CONTACT
Charisma Careers Pvt. Ltd.
302 Sunsilver Apartments, Nr. Akota Garden,
Productivity Road, Vadodara – 390020, India
Phone: (0265)6616173, Fax: (0265)6616172, Mobile: (0)9974094156
Email: nkroy@charismacareer.com , ccplnkr@yahoo.co.in
Website: www.charismacareer.com
|
| 2/15/2010 9:41:36 PM |
Hot News
| CCPL CNT Divn Vadodara/ Ahmedabad |
Certificate Course on
Process Equipment & Pressure Vessel Technology
(Part Time, Evening, Year 2010), Vadodara/ Ahmedabad
Need for the course on Process Equipment & Pressure Vessel Technology as part time evening course has been demanded by the prospective and existing process equipment professionals. We have been actively involved in training engineers related to Piping, Process Equipments, Material Handling, Materials Technology, etc. since last 22 years. This course will initiate engineers to prepare and develop equipment data sheet, sizing of process equipments, design them as per relevant codes, prepare fabrication details and specifications, estimation and quality assurance during fabrication and assembly.
This course will target the following needs of the existing and prospective process equipment engineers;
* Documentation related to Process Equipment Technology, in form of courseware.
* Interaction with professionals on regular basis using internet technology.
* Case Analysis / Problem Solving Methodology
* Free Flow of Information to the Engineers with the help of email newsletter.
Coverage
Process Equipment & Pressure Vessel Technology
Introduction about process Industries
List of Equipments used in Industries, their introduction, applications
Indian process plants, fabricators, engineering companies, consultants
Basic Engineering Knowledge on Engineering materials, Strength of materials
Introduction of Standards and other codes related to Pressure Vessels & Process Equipments, (ASME Sec.VIII Div.1, Latest 2004 issue, Sec II, Sec IX; IS 2825, TEMA, API 650 etc.)
Design and Analysis of Pressure Vessels & Components
Design & Analysis of Heat Exchangers
Design & Analysis of Storage Tanks
Selection of materials for process equipments
Development of process equipment drawings through AutoCAD and Practice sessions will be arranged in our center in Vadodara, Gujarat
Fabrication of process equipments; plate forming, cutting, welding
Exposure to Pressure Vessel Design Software (Compress, TEMA/ ASME Exchanger), Local Stress Analysis at Nozzle Vessel Junctions software (WinNozl) and others
Problem Solving Sessions
Inspection & Testing :
Quality control and assurance for raw materials, components and fabrication stages
Pressure Testing/ Special Testing for Pressure Vessels, process equipments & systems
Non Destructive Examination of equipments
Methodology
Technical Course Materials shall be regularly distributed to the participants.
Problem Solving sessions will be held at intervals.
Hand on practice of pressure vessel and heat exchanger drawing generation using AutoCAD at our CADD Center. Such practice and orientation session will be arranged as per convenience of the participant.
Case Studies shall be sent for study and participants shall be asked to submit their solutions. This will allow us to rate the progress of the participants and provide suggestions for improvements.
Regular tests will be conducted and results shall be immediately discussed so that participants are able to gauge their progress, and adopt corrective means to improve on their weak areas of understanding.
Every participant must have an email ID for effective interaction even after the class sessions.
About Charisma Careers:
CCPL is a Scientific & Technical Consultancy group consisting of 3 divisions:
1. Courses & Training : Organizes courses, training programs, seminars, exhibitions.
2. Publications: Publishes Journal, Proceedings, Books on various topics like Pressure Vessels, Piping , Project Management, Pollution Control, Energy Conservation.
3. S&TC: Undertake Scientific & Technical consultancy, selection of technologies, innovations and related technological services for process plants
Who should attend:
This program is useful for fresh & experienced engineers or engineers desiring to shift to process equipment and pressure vessel engineering disciplines. Till date, engineers from ENGINEERS INDIA, FURNACE FABRICA, GAIL, GRASIM, GSFC, IFFCO, IPCL, KIRLOSKAR, KTI, L&T LTD, L&T NIRO, MOTHER DAIRY, PRAJ, PARAMOUNT, STERLING GELATIN , SULZER , SEARCH CHEM, SG ENTERPRISE, SPIM ENGG, SGS INDIA, TRANSPEK, TATA STEEL, THAPAR CENTRE IRD, VA TECH WABAG , OMAN REFINERY, QATAR PETROCHEM and many other individuals have benefited from our regular courses. The course is continuously revised for the updated technology.
Duration:
Approximately 60 Hours.
DATE & TIME:
Duration: 6-7 Weeks
Dates: Starting June 2010
TIME: 6.30 PM – 9.00 PM (Tue, Thur, Sat of the weeks)
Fees: Rs 30,000 per participant. Service Tax @ 10.3% (Rs 3090) shall be charged as extra. (Total Fee: Rs 33,090).
Registration:
Kindly send-in your application for the registration to the course by submitting a letter with the bio-data of the participant along with the registration fee in the form of Demand Draft drawn on any bank of Vadodara and in favor of Charisma Careers Pvt. Ltd.
Contact:
Charisma Careers Pvt. Ltd.
302 Sun Silver Aptt, 4th Floor, Nr Akota Garden, Productivity Road, Vadodara 390020, Gujarat, India;
Ph: +91-265-6616173, Mobile: +91-9974094156; Fax: +91-265- 6616172
Email: nkroy@charismacareer.com ; ccplnkr@yahoo.co.in ; roy.narendra@gmail.com
|
| 3/3/2009 2:10:15 AM |
Hot News
| CCPL CNT Divn Vadodara |
|
Certificate Course on
Piping Engineering
Vadodara, Evening Batch, Year 2010
Need for the regular evening course on Piping Technology has been long felt by the prospective and existing Piping Professionals. We have been actively involved in training engineers related to Piping, Process Equipments, Material Handling, Materials Technology, etc. since last 22 years. This Course will initiate you to prepare and develop Plot Plans & Equipment Layouts so that you can attempt to prepare the Piping Layouts, their Sizing, Selection of Components, Design Analysis and finally to understand the Need of Documents for Piping Erections, Assembly, Testing and Inspections.
This course will target the following needs of the existing and prospective Piping Engineers:
- Documentation related to Piping Technology in form of courseware.
- Interaction with piping professionals on regular basis using internet technology.
- Case Analysis / Problem Solving Methodology
- Free Flow of Information to the Piping Engineers with the help of email newsletter.
Coverage
Piping Technology
Introduction about Process Industries in India
List of Piping components used in Industries, their introduction, applications.
Local process plants, fabricators, engineering companies, consultants, and site Erection contractors.
Basic Engineering Knowledge on Engineering materials, Strength of materials, Fluid Mechanics etc.
Understanding of Process Flow, P&I Diagrams, Interpretations, Plot Plan & Equipment layout generation.
Introduction to ASME B31.1, B31.3, B31.4 & B31.8, and other codes related to Process Piping.
Selection of Piping Components: Flanges, Fittings, Valves, Supports, Expansion Joint
Selection & Application of Pumps.
Selection & Application of Compressor.
Piping Plan, Pipe Sizing, Development of Isometric drawings.
Flow and Pressure Drop Calculations.
Selection of Materials for Process piping components.
Stress Analysis, Flexibility Stress Analysis.
Fabrication, including Welding, particularly for piping components.
Introduction to Piping Flow & Stress Analysis Softwares.
Inspection & Quality Control
Quality control and assurance for raw materials, components and during erection stages
Special Testing for Piping systems.
Non Destructive Examination of piping
Methodology
1. Technical Course Materials will be distributed to all participants.
2. Problem solving sessions will be held in class.
3. Case Studies shall be discussed with all the participants during the course and they will be asked to submit their solutions. This will allow us to rate the progress of the participants and provide suggestions for improvements.
4. Regular tests will be conducted and results shall be discussed in class so that participants are able to gauge their progress, and adopt corrective means to improve on their weak areas of understanding.
Who should attend?
This program is useful for fresh & experienced engineers or engineers desiring to shift to piping engineering disciplines. So far engineers from RELIANCE, MECON, STEELCO GUJARAT, KTI, IFFCO, SABERO ORGANICS, TRANSPEK, STERLING GELATIN, FURNACE FABRICA, SULZER, SEARCH CHEM, LINDE PROCESS, PETRON, PSA , OMAN REFINERY, ESSAR CONSTRUCTION, SNAM OMAN, SHELL OMAN, GULBRANDSEN CHEMICALS, SGS INDIA, FORBES MARSHALL, GNFC, SPV Indonesia and many other individuals have benefited from our regular courses. The course is continuously revised for the updated technology.
Duration:
Approximately 60 Hours.
DATE & TIME:
Duration: 6-7 Weeks
Dates: Starting June 2010
TIME: 6.30 PM – 9.00 PM (Mon, Wed, Fri of the weeks)
VENUE
Charisma Careers Pvt. Ltd,
301 Sunsilver Aptt, Productivity Road,
Nr. Akota Garden, Vadodara 390020, Gujarat, India
Phone: (0265) 6616173 Fax: (0265) 6616172, Mobile: (0) 9974094156
REGISTRATION
The Registration fees of Rs. 33090 (Rs. 30000 + Service Tax @10.3%) per delegate may be sent to us in the form of a Demand Draft / Cheque drawn in favor of Charisma Careers Pvt. Ltd. , on any bank in Vadodara.
You may pay the fee through wire transfer also, the detail of which will be made available after the registration of the candidate.
CONTACT:
Charisma Careers Pvt. Ltd, 302 Sunsilver Aptt, Productivity Road,
Nr. Akota Garden, Vadodara 390020, Gujarat, India ;
Phone: (0265) 6616173 ; Fax: (0265) 6616172, Mobile: (0) 9974094156
Email : nkroy@charismacareer.com ; ccplnkr@yahoo.co.in ; info@charismacareer.com
Web site: www.charismacareer.com
|
| 3/3/2009 2:04:55 AM |
|
| |
|
